Thread View: comp.sys.ibm.pc.hardware.comm
3 messages
3 total messages
Started by Daniel (Doni) Rosenzweig
Sun, 10 Mar 1996 23:08
COMPAQ Presario modem disabling help PLEASE!! Thanks-
Author: Daniel (Doni) Rosenzweig
Date: Sun, 10 Mar 1996 23:08
Date: Sun, 10 Mar 1996 23:08
5 lines
812 bytes
812 bytes
A friend of mine has a Compaq Presario 425 and wants to install a new modem. The problem is that disabling the built in modem via the setup program doesn't work well enough- and Compaq wants to charge $35 to tell him which jumper is used to fully disable it! Does anyone know where this jumper is- or who to speak to? Thanks alot!
Re: COMPAQ Presario modem disabling help PLEASE!! Thanks-
Author: Guardian
Date: Sun, 17 Mar 1996 00:25
Date: Sun, 17 Mar 1996 00:25
13 lines
1170 bytes
1170 bytes
For $25 Ill tell ya...or maybe your friend should get a different computer..make sure you check the support..ehehe..But this time Ill give ya a freebie...Try there FAXLINE...it holds what your looking for..specs.. Daniel (Doni) Rosenzweig wrote: > > A friend of mine has a Compaq Presario 425 and wants to install a new > modem. The problem is that disabling the built in modem via the setup > program doesn't work well enough- and Compaq wants to charge $35 to tell > him which jumper is used to fully disable it! Does anyone know where this > jumper is- or who to speak to? Thanks alot!
Re: COMPAQ Presario modem disabling help PLEASE!! Thanks-
Author: John Donaldson
Date: Thu, 21 Mar 1996 05:16
Date: Thu, 21 Mar 1996 05:16
17 lines
1562 bytes
1562 bytes
: Daniel (Doni) Rosenzweig wrote: : > : > A friend of mine has a Compaq Presario 425 and wants to install a new : > modem. The problem is that disabling the built in modem via the setup : > program doesn't work well enough- and Compaq wants to charge $35 to tell : > him which jumper is used to fully disable it! Does anyone know where this : > jumper is- or who to speak to? Thanks alot! I've got the Presario 425 too. Called Compaq (pay by the minute 900 line) they said go into C-MOS and disable the serial port (there's two lines-one says port-one says modem)-do both----it worked for me. then I put in a new I/O card (my 425 had a 8250 UART) and ran my new Cardinal 28,000 through the 9 pin async serial conector and it worked the first time (I'm still running 3.1). Wonder what this info cost my phone bill. When I bought my Compaq ages ago they were a nice company. $35.00 for help on something they built into the unit. Last one of theirs I buy! But the Cardinal seems to work fine.
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads