Tecmar Tape (QT125e & QT60i) Host Adapter 938469 REC C

Article View: comp.sys.ibm.pc.hardware.misc

Article #33

Back to comp.sys.ibm.pc.hardware.misc Previous Next

#33

From: David Longley
Date: Sun, 04 Feb 1996 12:37

24 lines
1428 bytes

I  have a couple of Tecmar tape drives and controllers. One is  a 
Tecmar QT60i (Tape drive is a Wangtek 5125EN) and the other is  a 
Tecmar QT125e. I assume the i and e reflect internal and external 
models but was somewhat thrown by the 5125EN model of the drive.

My  problem  is with the controllers. One is full length  with  a 
Wangtek  Assembly  number but Tecmar ROM, the other  is  a  small 
quarter length card, labelled HOST ADAPTER 938469 REV C.

It has 4 blocks of jumpers

J3 IIII                J1 III

J4 IIIIII              J2 III

I  suspect  J1 and J2 are DMA/DRQ 1-3 and J4 is IRQ.  That  would 
suggest  that  J3 is a 16 bit I/O. At present pins 3  and  4  are 
jumpered, but without a manual...

I  could do with a manual for the Tecmar QT60i and QT125e  drives 
and the controllers. Can anyone help?

-- 
David Longley

Technical Details

Message-ID: <823437449snz@longley.demon.co.uk>

Path: arc1-ca.pugleaf.net!mail2news.demon.co.uk!longley.demon.co.uk

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!mail2news.demon.co.uk!longley.demon.co.uk
From: David Longley <David@longley.demon.co.uk>
Newsgroups: comp.sys.ibm.pc.hardware.misc,comp.periphs,comp.periphs.scsi,sci.electronics.repair,demon.tech.pc
Subject: Tecmar Tape (QT125e & QT60i) Host Adapter 938469 REC C
Date: Sun, 04 Feb 96 12:37:29 GMT
Organization: Relational Technology
Message-ID: <823437449snz@longley.demon.co.uk>
Reply-To: David@longley.demon.co.uk
X-NNTP-Posting-Host: longley.demon.co.uk
X-Newsreader: Demon Internet Simple News v1.30
X-Mail2News-Path: longley.demon.co.uk