Re: DEBUG command to start BIOS on Western Digital 1007VSE1 Drive

Article View: comp.sys.ibm.pc.hardware.misc

Article #471

Back to comp.sys.ibm.pc.hardware.misc Previous Next

#471

From: John E. Lundgren
Date: Mon, 11 Apr 1994 06:22

8 lines
1437 bytes

There is no way to know what the debug address is for a hard disk.  The 
address is dependent on the controller card.  The old 8-bit cards used 
c800:5, I think.  So in debug, you would do G=C800:5  and you would get a 
message and menu.  Best of success.

--
Geek Code:  GAT d-- p-@ c++(++++) l? u? e+/* m++(*) s !n h+/(*) f g+ w+ 
t++ t- y-(*)

Technical Details

Message-ID: <2oaqb1$7uh@eis.calstate.edu>

Path: arc1-ca.pugleaf.net!gmd.de!xlink.net!howland.reston.ans.net!usc!nic-nac.CSU.net!ctp.org!not-for-mail

References: <2o9kr7$9nq@jabba.cybernetics.net>

Show Full Headers

Complete Article Headers

X-Google-Language: ENGLISH,ASCII-7-bit
X-Google-Thread: f8e37,167aa67f945d511f
X-Google-Attributes: gidf8e37,public
X-Google-Thread: f70d1,167aa67f945d511f
X-Google-Attributes: gidf70d1,public
X-Google-Thread: f4d7c,167aa67f945d511f
X-Google-Attributes: gidf4d7c,public
X-Google-Thread: 109e38,167aa67f945d511f
X-Google-Attributes: gid109e38,public
X-Google-Thread: f5f89,167aa67f945d511f
X-Google-Attributes: gidf5f89,public
X-Google-ArrivalTime: 1994-04-10 23:22:25 PST
Path: arc1-ca.pugleaf.net!gmd.de!xlink.net!howland.reston.ans.net!usc!nic-nac.CSU.net!ctp.org!not-for-mail
From: jlundgr@eis.calstate.edu (John E. Lundgren)
Newsgroups: comp.sys.ibm.pc.hardware.misc,comp.sys.ibm.pc.hardware.storage,alt.comp.hardware,alt.comp.hardware.homebuilt,biz.comp.hardware
Subject: Re: DEBUG command to start BIOS on Western Digital 1007VSE1 Drive
Date: 10 Apr 1994 23:22:25 -0700
Organization: California Technology Project of The Calif State Univ
Lines: 8
Message-ID: <2oaqb1$7uh@eis.calstate.edu>
References: <2o9kr7$9nq@jabba.cybernetics.net>
NNTP-Posting-Host: eis.calstate.edu

Reply to Parent Message