🚀 go-pugleaf

I've been working on a VLB Octek Chipset based motherboard with a 
486-25SX  which  has been run at 33MHz in the past.  BIOS  is  MR 
BIOS.

Problem 1) - If the system is left on for about 30 mins and  then 
             switched off and back on, after the setup delay  and 
             memory check, the system puts up a message saying it 
             is  waiting  for the hard disk to spin up  and  then 
             just times out.  Poking  around  inside at  the  VLB
             video  card/HD  controller (multifunction  card  (it 
             will come back to life.

Problem 2) - It looks like the system time  clock  is  running 
             rather fast, the seconds look like they're passsing
             twice as fast as they should.

At  the  moment I have 2 70ns 30 pin SIMMs in the  system  and  2 
100ns 30 pin SIMMs. (I know the latter are slow, but they seem to 
pass the POST. I have now put the system back to 25MHz.

Are  the two problems above related? What do I have to change  to 
correct the system clock problem? ie what's the chip? 

Alternatively, anyone got a 486VLB board they are throwing out?
-- 
David Longley