Jumpers for VLB Combo (SVGA/IDE/IO) card

Thread View: comp.sys.ibm.pc.hardware.misc

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Paul Gortmaker Fri, 08 Dec 1995 00:00

#184

Author: Paul Gortmaker
Date: Fri, 08 Dec 1995 00:00

38 lines
1870 bytes

It would be great if somebody had the jumper settings for this VLB 
combo card.  It combines the following all into *one* card:

        SVGA                            (Cirrus Logic 5426 chip)
        IDE                             (Paradise PDC20230C chip)
        Floppy, Serial, Parallel, Game  (Winbond W83757F)

As usual, no manufacturer information is given on the card. :-(

If anybody with one of these combo cards could quickly jot down
the jumper settings for JP1 -> JP9, I would greatly appreciate it.

Thanks,
Paul.

-=-=-=-=-=-=-=-=-=-= Card Description Follows -=-=-=-=-=-=-=-=-=-=

It has DIP DRAMs alternating with empty DIP sockets (for 2MB
expansion) across the top of the board.

It has JP1, JP2, JP5, JP6, JP7 and JP8 as standard 3 pin jumpers.
There is no JP3 or JP4 on the card.

JP9 is a 13x2 (26 pins) BERG strip (like the IDE connector, only 
shorter) that is presently jumpered  (1,2) (3,4) (9,10) (11,12)
(17,18) (19,20) and (25,26).

The 2xN BERG connectors on the card (except for J7) are:

J1	COM A 		10 pin
J2	COM B		10 pin
J3	IDE		40 pin
J4	VGA FEATURE	26 pin
J5	GAME PORT	16 pin
J6	FLOPPY PORT	34 pin
J7	HDD LED		4 pin single strip
J8	????		10 pin			(diagnostic port???)

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads