🚀 go-pugleaf

Problems with ZIP 100 � internal

I just bought and installed IOMEGA ZIP 100 internal drine (not scsi) and
folloved instructions for setup.

I have Pentium 133 on 586 OPTI Viper PCI/ISA motherboard. On primary master
is first hard disk, on primary slave second hard disk, on secondary master
IOMEGA ZIP and on secondary slave CD ROM. Jumpers for masters and slaves
are set right.

I realize folowing problems:

Windows 95 reckognize all four drives
c for HD
d for hd
e for IOmega zip
f for CDROM

In control panel-device manager stays that HDD OPTI dual PCI  IDE
controller is working properly. But before Primary IDE controller (single
fifo) and secodary IDE controller (single fifo) I have yellow warning marks
that they are not working properly. I tried to remove them and reinstall
but the problem remained. In control panel-performance stays that drives
c,d and e are using MS-dos compatibility file system.

My computer reckognizes IOMEGA drive, an I can read it and write on it, but
when I change the ZIP disk, it states that the disk is not formatted and I
must restart the computer to work with another disk.

If anybody can help me what to do please E-mail me bombek@siol.net.

Waiting desperately help.

Best regards,

Janez

New situation:

I solved problems with controllers and disks now, but I still has problem
with changing zip disk, because after eject of ZIP disk new disk is not
reckognized and on screen says "disk is not formatted". In proerties of
IOMEGA disk "diagnose do not start" and says all the time insert new disk