🚀 go-pugleaf

In <4bqj3s$9un@news2.realtime.net>, else@bga.com (e l swarthout) writes:
: I bought a CFP1060S 1G scsi drive and it doesn't have the 
: normal 4-pin power connector and 50-pin interface connector 
: on the back as show in <http://www.conner.com/cfp1060s.html: .
: Instead, it has what looks like a single 80-pin connector.
: The spec-sheet from Conner's server (#5510) mentions a CFP1060E
: as having a "80-pin single connector attachment (SCSI)" 
: 
: Did I really get a "E" model?  (It has an offical Conner S-label)
: Is this 80-pin connector standard?  Are there any cable adapters
: available for it or should I just return it?
: 
: Thanks for any help, 
: Ed Swarthout
: Austin, TX

You should have received an 80-pin to 50-pin adapter with the drive;
if the vendor won't provide, return it.  The 80-pin to 50-pin adapter
also contain a socket for the power cable which means some pins of
the 80-pins are for power.

I had purchased the drive at NCA and it came with the 80-pin to 50-pin
adapter.