🚀 go-pugleaf

In <NEWTNews.819496475.13845.apmorgan@us010277>, andrew p morgan <apmorgan@interramp.com> writes:
>
>
>
>I am having troubles installing a quantum atlas 4gig scsi drive.
>
>I have successfully copied files from my 1.2gig eide conner to my
>quantum 4gig atlas, now i want to remove my eide and boot off my 
>quantum.
>
>when i remove cable to eide drive and eliminate from my CMOS setup
>and try to boot from scsi drive i get disk I/O error.
>
>i tried booting from startup disk and run fdisk i get a can't find
>fixed disk error. when i put eide drive back in fdisk runs fine.
>
>i'm  trying to set my scsi drive as the active partition, but since i can't
>run fdisk without eide drive installed and fdisk only lets eide drive be 
>active partition, i'm in a catch-22
>
>i'm using regular dos fdisk and format, since adaptec low level format 
>utility fails
>
>any help is appreciated
>andrew
>
>
Also, make sure that the BIOS on the host adapter is set to "on," since
you can't use a device driver before you boot (OK, this may sound like
a no-brainer, but guess who screwed this up once <oops> ).

Benjamin Braun