Using multi-connector SCSI cable

Article View: comp.sys.ibm.pc.hardware.storage

Article #382

Back to comp.sys.ibm.pc.hardware.storage Previous Next

#382

From: Mitch Regenbogen
Date: Tue, 02 Apr 1996 17:15

14 lines
1137 bytes

I have a five connector internal SCSI cable.  One end is, of course, 
connected to the SCSI host adapter, which is terminated.  I have two other 
devices to connect.  I know that the device on the other "end" has to be 
terminated, but does that device have to be on the cable's end 
connector?  And does the other (non-terminated) device have to be 
connected to an adjacent connector, or can there be an unused connector 
between devices?

Thanks for any info.
-- 
--------------------------------------------------------------------
| Mitch Regenbogen      |                                          |
| mreg@panix.com        |  "I like to watch."  --Chauncey Gardner  |
| Brooklyn, New York    |                                          |

Technical Details

Message-ID: <4jrnao$6pa@panix2.panix.com>

Path: arc1-ca.pugleaf.net!newsfeed.internetmci.com!panix!not-for-mail

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!newsfeed.internetmci.com!panix!not-for-mail
From: mreg@panix.com (Mitch Regenbogen)
Newsgroups: comp.sys.ibm.pc.hardware.storage,comp.periphs.scsi
Subject: Using multi-connector SCSI cable
Date: 2 Apr 1996 12:15:04 -0500
Organization: PANIX
Message-ID: <4jrnao$6pa@panix2.panix.com>
NNTP-Posting-Host: panix2.panix.com
X-Newsreader: TIN [UNIX 1.3 950824BETA PL0]