Nikon Coolscan and IBM DOCK II

Thread View: comp.sys.ibm.pc.hardware.systems

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by David Longley Sat, 08 Jun 1996 00:00

#181

Author: David Longley
Date: Sat, 08 Jun 1996 00:00

14 lines
1637 bytes

I am trying to get my Nikon Coolscan to work with my Thinkpad 750Cs and
IBM DOCK II. The scanner is installed OK and when the machine starts up
I get the Adaptec BIOS info - it then loads the ASPI driver ok so I can
see that the Coolscan is being recognised on ID 2. The DOCK II SCSI port
is address 340.

However when I go into Windows 3.11 and install the Nikon 1.2E software, 
and try to scan or preview, I just get an error message that the scanner
did not respond. If I scan the bus in windows, it shows up.....

Anyone had any experience with the coolscan and Dock II?
-- 
David Longley

Re: Nikon Coolscan and IBM DOCK II

#182

Author: David Longley
Date: Sat, 08 Jun 1996 00:00

23 lines
1975 bytes

In article <834248123snz@longley.demon.co.uk>
           David@longley.demon.co.uk "David Longley" writes:

> I am trying to get my Nikon Coolscan to work with my Thinkpad 750Cs and
> IBM DOCK II. The scanner is installed OK and when the machine starts up
> I get the Adaptec BIOS info - it then loads the ASPI driver ok so I can
> see that the Coolscan is being recognised on ID 2. The DOCK II SCSI port
> is address 340.
> 
> However when I go into Windows 3.11 and install the Nikon 1.2E software, 
> and try to scan or preview, I just get an error message that the scanner
> did not respond. If I scan the bus in windows, it shows up.....
> 
> Anyone had any experience with the coolscan and Dock II?
> -- 
> David Longley
> 
Partly solved. The software was not autodetecting the SCSI ID. However,
the coolscan does not appear in the bus scan with the IBM DOCK II option
disk..odd...
-- 
David Longley

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads