Parity Errors

Article View: comp.sys.ibm.pc.hardware

Article #18671

Back to comp.sys.ibm.pc.hardware Previous Next

#18671

From: Occupational Health Ochealth Saf...
Date: Thu, 27 Jun 1991 17:32

16 lines
1008 bytes

We have an AST 286, with 1 Meg Ram. It has been getting parity errors
quite regularly, but not in any identifiable pattern. I believe parity
errors are caused by flaky DRAMs, or flaky connections to the RAM.

Are parity errors caused exclusively by the RAM chips? If so then I'd
be pretty safe replacing all the ram chips. The error pops up at segment 
8000.

On another note, does anyone know how to contact AST? ie 1 800 number or
fax.

Thanks,

John Paul Morrison

(please respond by e-mail)

Technical Details

Message-ID: <1991Jun27.173216.16996@unixg.ubc.ca>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!uunet!van-bc!ubc-cs!unixg.ubc.ca!ochealth

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!uunet!van-bc!ubc-cs!unixg.ubc.ca!ochealth
From: ochealth@unixg.ubc.ca (Occupational Health Ochealth Safety)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: Parity Errors
Message-ID: <1991Jun27.173216.16996@unixg.ubc.ca>
Date: 27 Jun 91 17:32:16 GMT
Sender: news@unixg.ubc.ca (Usenet News Maintenance)
Organization: University of British Columbia, Vancouver, B.C., Canada
Lines: 16
Nntp-Posting-Host: chilko.ucs.ubc.ca