Article View: comp.sys.ibm.pc.hardware
Article #18771Re: Cirrus Logic - Wait state
From: Stannon Yen
Date: Sun, 03 Jan 1993 15:11
Date: Sun, 03 Jan 1993 15:11
18 lines
1201 bytes
1201 bytes
h8915726@hkuxb.hku.hk (Medusa) writes:
Hello Medusa,
> Can anyone tell me how to set the wait state of
> Cirrus Logic card v1.00d? I'm using a 486DX-50, I'm afraid
> the card is not very comfortable with this speed, so I
> want to set it to 1-wait state. But my manual is only
> for v1.00 and absolutely no description as to how to do it.
> (not even the pcb layout...)
You may search for a jumper (2 pin) in the center of your card. If
you found that the jumper is connected, it is in zero wait state. If
not, it is 1 wait state. You may try to remove it. But my ALVGA has no
problem on both state on my 386DX-40. What kind of problem do you have?
Regards,
CT Yen.
Technical Details
Message-ID:
<1993Jan3.151134.3010@cucs5.cs.cuhk.hk>Path:
arc1-ca.pugleaf.net!sparky!uunet!haven.umd.edu!darwin.sura.net!wupost!sdd.hp.com!swrinde!network.ucsd.edu!munnari.oz.au!hp9000.csc.cuhk.hk!cucs5.cs.cuhk.hk!yen1366References:
<C086MB.Kp3@hkuxb.hku.hk>Show Full Headers
Complete Article Headers
Newsgroups: comp.sys.ibm.pc.hardware Path: arc1-ca.pugleaf.net!sparky!uunet!haven.umd.edu!darwin.sura.net!wupost!sdd.hp.com!swrinde!network.ucsd.edu!munnari.oz.au!hp9000.csc.cuhk.hk!cucs5.cs.cuhk.hk!yen1366 From: yen1366@cs.cuhk.hk (Stannon Yen) Subject: Re: Cirrus Logic - Wait state Message-ID: <1993Jan3.151134.3010@cucs5.cs.cuhk.hk> Sender: news@cucs5.cs.cuhk.hk Organization: Faculty of Engineering, The Chinese U. of Hong Kong References: <C086MB.Kp3@hkuxb.hku.hk> Date: Sun, 3 Jan 1993 15:11:34 GMT Lines: 18