🚀 go-pugleaf

Hi,

I have a rather strange modem problem: I have a 1200 baud Hayes compat.
modem (Repko M2000trio) that I want to connect to my 386 clone.
I got it from a friend, who used it with a PS/2 and Procomm 2.3, which
worked ok.
However, when I attach it to my 386 with Procomm 2.4.2, it does not dial
any phone number properly: I can hear the (phone) dialing tone through
the internal speaker, waiting for a number to be dialed. But the dialing
itself is just a short period of (fluctiating) noise (which length is
proportional to the length of the phone number, so it DOES try to dial
something). And then of course, nothing happens.
With my friend's PS/2, everything still works, i.e. we can hear the
dialing pulses.
I've tried it with a 286 (Bull Micral, so no cheap clone...), but I get
the same negative result. Also, I've tried using Windows' (3.0 and 3.1)
Terminal program, but again: no luck.

What could cause this problem? I don't suppose it's the serial cable,
since it is a full 25-wire one (or is it wrong to connect all 25 pins???)

Any help would be greatly appreciated.

Marcel.
-- 
 X	   Marcel Wijkstra   AIO   (wijkstra@fwi.uva.nl)
|X|	     Faculty of Mathematics and Computer Science	
 X	       University of Amsterdam   The Netherlands
======Life stinks. Fortunately, I've got a cold.========