🚀 go-pugleaf

In article <hielsche.727590836@aragorn> hielsche@aragorn.CSEE.Lehigh.Edu (Frank Hielscher) writes:
>fuad@madrone.eecs.ucdavis.edu (Turnando Fuad) writes:
>
>>Is it possible on this monitor to use the whole physical screen and still have
>>a rectangular image(especially in 1024x768 and 1024x1280)? Have anyone observed
>>the image is slightly tilted upwards to the right(miniscule but observable)?
>
>Yes, at 1024x768 you can fill the whole screen.
>
>No, at 1280x1024 the maximum image size (diagonal) is about an inch less.
>
>Tilted image? Your deflection coils are not mounted correctly. A major
>hassle to change that.

I have Gateway 66V with Nanao F550i and not only got the 1280x1024 at 60Hz
I have Gateway 66V with NanaoF550i, and got 1280x1024 at 60Hz not just
edge to edge perfectly square, but also easily overscanning beyond the edges.
All you have to do is to use "install" from the mach32 directory, and tinker
with power-up menu in custom monitor mode, stretching and repositioning the
wire rectangle in 1280x1024 mode. Once you have done the best you could there, 
exit the "instal" and make final stretching and adjustments using controls
on your Nanao.