How to install a second IDE hard drive? Need Jumper setting!

Article View: comp.sys.ibm.pc.hardware

Article #19093

Back to comp.sys.ibm.pc.hardware Previous Next

#19093

From: Waihon Andrew Kwong
Date: Wed, 06 Jan 1993 16:41

17 lines
1057 bytes

Hi there,

I have problem on installing a second IDE harddrive to my 386 system.
(Seagate ST-157A 41M) Both the drive is working when they the only
drive connected to the system. But when they are both connected to the
system, the system can't boot up :

D: Drive Failure
<F1> For SETUP

I believe both of the drive have internal setting that they are
master drives, so they can't work together....
Does anybody know the jumper setting of the (Seagate ST-157A IDE)
drive? Please send it to me by E-Mail.

Thanks in advance,
Andy

Technical Details

Message-ID: <1993Jan6.164120.17824@ee.eng.ohio-state.edu>

Path: arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!sample.eng.ohio-state.edu!volga!wkwong

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.ibm.pc.hardware,comp.sys.ibm.pc.misc
Path: arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!sample.eng.ohio-state.edu!volga!wkwong
From: wkwong@volga.eng.ohio-state.edu (Waihon Andrew Kwong)
Subject: How to install a second IDE hard drive? Need Jumper setting!
Message-ID: <1993Jan6.164120.17824@ee.eng.ohio-state.edu>
Sender: news@ee.eng.ohio-state.edu
Organization: The Ohio State University Dept of Electrical Engineering
Distribution: usa
Date: Wed, 6 Jan 1993 16:41:20 GMT
Lines: 17