DTC SCSI/Noname IDE together+friendly?

Article View: comp.sys.ibm.pc.hardware

Article #19159

Back to comp.sys.ibm.pc.hardware Previous Next

#19159

From: Scott V Buresh
Date: Fri, 22 Jan 1993 03:18

25 lines
1469 bytes


  Well, here's a question I'm almost sure has been asked before:  Can
you have a SCSI drive, specifically a Quantum prodrive 210S, and an IDE,
a Seagate(107 MB,I forget the #) with a DTC 3280AS SCSI host adapter and
a no-name(think Toshiba chipset) IDE card co-existing in the same system?

  We have the drives set to different IRQs (11 and 14) and their ROMs 
mapped into different address spaces.  The SCSI is set up as type [none]
and the IDE is type 47+ (custom).  The system is a clone 386sx-25(AMD chip)
with a Soundblaster and Diamond Speedstar 24x VGA card.  We can get either
drive to work alone, by making it drive 1 and setting the CMOS so the other
one isn't listed.  We would like to keep both drives in the system
(obviously :).  Do we have to make the IDE a slave drive?


   Has anybody done this sort of thing?  All replies/comments are 
welcome.  

Reply to:

akhran@krypton.mankato.msus.edu  
(Erik Green, running on a borrowed account)

-------------

Technical Details

Message-ID: <1993Jan21.211847.2773@vax1.mankato.msus.edu>

Path:

arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!qt.cs.utexas.edu!yale.edu!yale!gumby!destroyer!fmsrl7!lynx.unm.edu!umn.edu!msus1.msus.edu!vax1.mankato.msus.edu!krypton.mankato.msus.edu!akhran

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!qt.cs.utexas.edu!yale.edu!yale!gumby!destroyer!fmsrl7!lynx.unm.edu!umn.edu!msus1.msus.edu!vax1.mankato.msus.edu!krypton.mankato.msus.edu!akhran
Newsgroups: comp.sys.ibm.pc.hardware
Subject: DTC SCSI/Noname IDE together+friendly?
Message-ID: <1993Jan21.211847.2773@vax1.mankato.msus.edu>
From: akhran@krypton.mankato.msus.edu (Scott V Buresh)
Date: 21 Jan 93 21:18:47 -0600
Nntp-Posting-Host: krypton.mankato.msus.edu
Lines: 25