Article View: comp.sys.ibm.pc.hardware
Article #19251Re: Math coprocessor question - Use a 387-40 in a 386-33?
From: Brian Fritz/ ADVISOR Russell (MA...
Date: Thu, 07 Jan 1993 19:34
Date: Thu, 07 Jan 1993 19:34
23 lines
1394 bytes
1394 bytes
In article <sch2.725598081@crux1.cit.cornell.edu> sch2@crux2.cit.cornell.edu (Stephen Hsieh) writes:
>Is it okay to use a Cyrix 387-40 inside my 386-33? I have a 33mhz and a 40
>mhz computer at home, and I need the coprocessor in the 33mhz system right
>now. But I'm planning on moving the coprocessor to the 40mhz system in the
>future.
>
>Will I encounter any difficulties? Are cyrix coprocessors a good brand?
>
>Any info would be appreciated.
>
>Steve
HI Steve,
I have a similar question...except just the opposite...I want
to know if it's alright to use a 387-33 in a DX-40 system.
-Brian
--
--------------------------------------------------------------------------------
Brian D. Fritz
Email Address: RME81977@ZACH.FIT.EDU
--------------------------------------------------------------------------------
Technical Details
Message-ID:
<4541@winnie.fit.edu>Path:
arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!darwin.sura.net!gatech!uflorida!winnie!zach.fit.edu!rme81977References:
<sch2.725598081@crux1.cit.cornell.edu>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!darwin.sura.net!gatech!uflorida!winnie!zach.fit.edu!rme81977 From: rme81977@zach.fit.edu (Brian Fritz/ ADVISOR Russell (MAE)) Newsgroups: comp.sys.ibm.pc.hardware Subject: Re: Math coprocessor question - Use a 387-40 in a 386-33? Message-ID: <4541@winnie.fit.edu> Date: 7 Jan 93 19:34:09 GMT References: <sch2.725598081@crux1.cit.cornell.edu> Sender: usenet@winnie.fit.edu Organization: Florida Institute of Technology, Melbourne USA Lines: 23