Re: Micronics MotherBoard???

Article View: comp.sys.ibm.pc.hardware

Article #19472

Back to comp.sys.ibm.pc.hardware Previous Next

#19472

From: Michael Evans
Date: Sat, 23 Jan 1993 02:31

24 lines
1072 bytes

In article <1993J
>I just bought a Gateway 2000 386/25 nocache Micronics Motherboard and I need
>some help with it.  I've already tried both Gateway and Micronics Tech Lines.

[...]

>PS:       Yes, I have tried setting Jumpers on the board.  None apply to the
>          simms.
>
>Byron
>
>

I have an identical Micronics motherboard (386/25 no cache). 
According to my manual, you are supposed to set jumpers W98
and W100 (next to the 32-bit memory slot) to pins 1 & 2 for
256K SIMMs, and 2 & 3 for 1M SIMMs.  I never put 256K SIMMs
on the board, so what the manual says is the extent of my 
experience.  My motherboard is revision D3.

Hope this helps.
-- 
Mike Evans
dflint@unlv.edu

Technical Details

Message-ID: <1993Jan23.023137.22889@unlv.edu>

Path: arc1-ca.pugleaf.net!sparky!uunet!nevada.edu!jimi!dflint

References: <1993Jan22.052306.15026@compunet.uucp>

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.ibm.pc.hardware
Path: arc1-ca.pugleaf.net!sparky!uunet!nevada.edu!jimi!dflint
From: dflint@unlv.edu (Michael Evans)
Subject: Re: Micronics MotherBoard???
Message-ID: <1993Jan23.023137.22889@unlv.edu>
Sender: news@unlv.edu (News User)
Organization: UNLV
References: <1993Jan22.052306.15026@compunet.uucp>
Date: Sat, 23 Jan 93 02:31:37 GMT
Lines: 24

Reply to Parent Message