Star SG-10 Dot Matrix Printer : HELP.

Article View: comp.sys.ibm.pc.hardware

Article #19551

Back to comp.sys.ibm.pc.hardware Previous Next

#19551

From: V. Chandramouli
Date: Sun, 10 Jan 1993 00:37

20 lines
1606 bytes

The test printing comes out fine when I hold the line-feed button
while switching the power supply on.  However, when I connect it 
to my computer, and try printing say "DIR > LPT2", only part
of the directory gets printed -- it skips characters inbetween
and some lines too.  For example, "echo 'abcdefghijklmn' > LPT2",
will print something like "abcdeikn" !   I think the problem is
in the setting of the DIP switches.  Since I dont have the manual,
I an unable to set the correct configuration.  Right now, I have
DIP switches set to:   (1) 1-8 = ON
                       (2) 1 = ON, 2 = OFF, 3 = OFF, 4 = ON.
Is this correct ?  

Can anyone send me more information on this printer ?  Any help
would be very much appreciated.  Is there anywhere I can purchase
a copy of this printer's manual ?

Thanks in advance for the help.  Please reply to my e-mail address.

Chandramouli.           mouli@emx.cc.utexas.edu

Technical Details

Message-ID: <86397@ut-emx.uucp>

Path:

arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!howland.reston.ans.net!usc!cs.utexas.edu!ut-emx!ccwf.cc.utexas.edu!vcm

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!howland.reston.ans.net!usc!cs.utexas.edu!ut-emx!ccwf.cc.utexas.edu!vcm
From: vcm@ccwf.cc.utexas.edu (V. Chandramouli)
Newsgroups: comp.sys.ibm.pc.hardware,comp.sys.ibm.pc.misc,comp.periphs.printers
Subject: Star SG-10 Dot Matrix Printer : HELP.
Message-ID: <86397@ut-emx.uucp>
Date: 10 Jan 93 00:37:13 GMT
Sender: news@ut-emx.uucp
Reply-To: vcm@ccwf.cc.utexas.edu (V. Chandramouli)
Followup-To: comp.sys.ibm.pc.hardware
Distribution: na
Organization: The University of Texas at Austin, Austin TX
Lines: 26
Hello:   I recently bought a Star SG-10 Dot Matrix Printer from
Originator: vcm@huey.cc.utexas.edu