MAG PMV1448 monitor query

Article View: comp.sys.ibm.pc.hardware

Article #19744

Back to comp.sys.ibm.pc.hardware Previous Next

#19744

From: Angelo Haritsis
Date: Mon, 25 Jan 1993 19:18

17 lines
1192 bytes

I have the above monitor and a Tseng ET4000 Svga board. I can run all modes up
to 640x480 ok, but 800x600 and 1024x768 put some fuzzy lines on the screen.
I was advised to play with the DIP switches of the card, but couldn't find
anything relevant. A NEC 3D monitor works fine on all modes of the card.
The MAG specs give a 72Hz vertical freq for hi resolutions but the ET4000
board produces only 60Hz. I should expect that the monitor adjust within the
above range.
Is my monitor dead, or do I have to get a video board with 70Hz vertical freq
capability ?
Please reply by personal e-mail.
Thanks.

-- 
Angelo Haritsis, Applied Systems Section
s-mail: Dpt of Computing,Imperial College, 180 Queen's Gate, London SW7 2BZ, UK
e-mail: ah@doc.ic.ac.uk - tel:+44 71 589 5111 (x7511) - fax:+44 71 581 8024

Technical Details

Message-ID: <km3.727989529@dolphin.doc.ic.ac.uk>

Path: arc1-ca.pugleaf.net!sparky!uunet!pipex!doc.ic.ac.uk!dolphin.doc.ic.ac.uk!km3

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!pipex!doc.ic.ac.uk!dolphin.doc.ic.ac.uk!km3
From: ah@doc.ic.ac.uk (Angelo Haritsis)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: MAG PMV1448 monitor query
Date: 25 Jan 93 19:18:49 GMT
Organization: Dept. of Computing, Imperial College, London
Lines: 17
Message-ID: <km3.727989529@dolphin.doc.ic.ac.uk>
NNTP-Posting-Host: dolphin.doc.ic.ac.uk