Article View: comp.sys.ibm.pc.hardware
Article #19887Re: Gateway video problem
From: David Seah
Date: Mon, 11 Jan 1993 21:10
Date: Mon, 11 Jan 1993 21:10
17 lines
1545 bytes
1545 bytes
In article <4284@eastman.UUCP> lrxi00@icts01.Kodak.COM (James Nonnemacher) writes:
>Using the 15" Crystal Scan monitor in non-interlaced mode, with the Windows 3.1 SVGA driver, switching
>from Windows to DOS causes the screen to "jump" off center. Image can be recentered using montor
>controls.
Use the ATI install program's "Power-on Config - Custom Monitor" option to
recenter the display. You will have the opportunity to position each mode
from 640x480 up to 1280x1024 with the arrow keys. The settings will be
saved to the ATI Ultra's EEPROM, so you'll never have to do it again :)
Just don't be too flippant with the sizing and refresh rates...don't want
to push your monitor into the deep end. Positioning the display area is
safe.
--
Dave Seah ^..^ | Graduate MSEE, University of Rochester, New York |
| Apple II Graphics & Sound Forum Consultant, America Online |
[Internet] seah@ee.rochester.edu, AFCDaveS@aol.com [America Online] AFC DaveS
Technical Details
Message-ID:
<1993Jan11.211007.12531@ee.rochester.edu>Path:
arc1-ca.pugleaf.net!sparky!uunet!cis.ohio-state.edu!zaphod.mps.ohio-state.edu!cs.utexas.edu!sun-barr!ames!pacbell.com!iggy.GW.Vitalink.COM!cs.widener.edu!dsinc!ub!galileo.cc.rochester.edu!ee.rochester.edu!seahReferences:
<4284@eastman.UUCP>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!cis.ohio-state.edu!zaphod.mps.ohio-state.edu!cs.utexas.edu!sun-barr!ames!pacbell.com!iggy.GW.Vitalink.COM!cs.widener.edu!dsinc!ub!galileo.cc.rochester.edu!ee.rochester.edu!seah From: seah@ee.rochester.edu (David Seah) Newsgroups: comp.sys.ibm.pc.hardware Subject: Re: Gateway video problem Message-ID: <1993Jan11.211007.12531@ee.rochester.edu> Date: 11 Jan 93 21:10:07 GMT References: <4284@eastman.UUCP> Distribution: na Organization: Univ of Rochester, College of Engineering and Applied Science Lines: 17