Building a good 486dx2/66 VLB/EISA machine

Article View: comp.sys.ibm.pc.hardware

Article #19940

Back to comp.sys.ibm.pc.hardware Previous Next

#19940

From: Dan DiPiero
Date: Tue, 12 Jan 1993 03:46

10 lines
1051 bytes

   I am looking to build a good 486/66dx2, and I would like to get information 
on where to buy VLB/EISA motherboards. Ihave heard of AIR, and Micronics,
but I am not familiar with either of them, and maybe somebody out there
has some experience with these or other suppliers. I would like to buy
straight from the producer if possible (is this a good idea?) I need phone numbers
and/or addresses to get in contact with them, and any suggestions to prevent
the $5000 mistake (should be cheaper than $5000).
                   thanks
                        Dan-O

Technical Details

Message-ID: <1993Jan12.034632.8613@news.ysu.edu>

Path: arc1-ca.pugleaf.net!sparky!uunet!spool.mu.edu!agate!usenet.ins.cwru.edu!neoucom.edu!news.ysu.edu!do-not-reply-to-path

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.ibm.pc.hardware
Path: arc1-ca.pugleaf.net!sparky!uunet!spool.mu.edu!agate!usenet.ins.cwru.edu!neoucom.edu!news.ysu.edu!do-not-reply-to-path
From: ai076@yfn.ysu.edu (Dan DiPiero)
Subject: Building a good 486dx2/66 VLB/EISA machine
Message-ID: <1993Jan12.034632.8613@news.ysu.edu>
Sender: news@news.ysu.edu (Usenet News Admin)
Nntp-Posting-Host: yfn.ysu.edu
Organization: Youngstown State University/Youngstown Free-Net
Date: Tue, 12 Jan 1993 03:46:32 GMT
Lines: 10