🚀 go-pugleaf

In article <1993Jan19.155636.4442@cs.sandia.gov> rbsmith@sandia.gov (Randall B Smith) writes:
>Hello:
>It sounds like there is a lot of Gateway 486/66 experience
>out there. I have a few questions regarding both the
>4DX2-66V AND 4DX2-66E models:
>
>Is the serial-i/o implemented with a 16550 style UART (one
>that contains 16-word fifos)?
 

No.  The UARTs use your basic, no-frills 16450.


>Can one disable the serial-i/o and parallel-i/o to support
>the use of the address space + irq for an i/o adpater card?


Yes.  This is done through the Phoenix bios cmos setup.


>How many pins are in the CPU expansion socket (169, 238 or xxx)?
>I am curious about support for the Pentium Overdrive chip.


Mine has 169, so it from what I hear, nix on the Pentium.


>Do both machines have a total of 4 simm sockets?


The 66V does have 4.  Don't know about the E.


>What is the cost of a single 16MB simm upgrade?


I think about $500.


>What is the ramdac & 2MB upgrade cost for the ATI Ultra Pro?


$125 + shipping.




-- 
===============================================================================
Daniel Matthew Coleman			  Internet: dcoleman@ccwf.cc.utexas.edu
The University of Texas at Austin		Electrical/Computer Engineering
-------------------------------------------------------------------------------