Phoenix BIOS SETUP

Article View: comp.sys.ibm.pc.hardware

Article #20555

Back to comp.sys.ibm.pc.hardware Previous Next

#20555

From: Mike McBain
Date: Fri, 29 May 1992 14:20

13 lines
1405 bytes

I have a Micronics 486 motherboard with a Phoenix BIOS which is
complaining `Invalid configuration Run SETUP'

This is a dork's question, OK? How do I run SETUP? This bugger
doesn't want to read the floppy drive. The light comes on and it spins,
it doesn't read. It just hangs there. Should <F2> work to bring
up the CMOS display? Any suggestions will be instantly implemented
(about how to fix this problem, that is)
-- 
---
Mike McBain                                 David Syme Faculty of Business
mjm@monu6.cc.monash.edu.au                  Monash University - Caulfield
+61 3 573 2646                              Australia

Technical Details

Message-ID: <1992May29.142019.4913@monu6.cc.monash.edu.au>

Path: arc1-ca.pugleaf.net!sparky!uunet!spool.mu.edu!mips!mips!munnari.oz.au!trlluna!bruce.cs.monash.edu.au!monu6!mjm

Show Full Headers

Complete Article Headers

X-Google-Language: ENGLISH,ASCII-7-bit
X-Google-Thread: ffec8,4cf270f61b0c8145,start
X-Google-Attributes: gidffec8,public
X-Google-Thread: 10d683,4cf270f61b0c8145,start
X-Google-Attributes: gid10d683,public
X-Google-ArrivalTime: 1992-05-29 16:45:52 PST
Path: arc1-ca.pugleaf.net!sparky!uunet!spool.mu.edu!mips!mips!munnari.oz.au!trlluna!bruce.cs.monash.edu.au!monu6!mjm
From: mjm@monu6.cc.monash.edu.au (Mike McBain)
Newsgroups: comp.sys.ibm.pc.hardware,aus.computers.ibm-pc
Subject: Phoenix BIOS SETUP
Keywords: Invalid configuration
Message-ID: <1992May29.142019.4913@monu6.cc.monash.edu.au>
Date: 29 May 92 14:20:19 GMT
Article-I.D.: monu6.1992May29.142019.4913
Followup-To: comp.sys.ibm.pc.hardware
Organization: Monash University, Melb., Australia.
Lines: 13