Adding Hard Drive to Compaq Deskpro 8086

Article View: comp.sys.ibm.pc.misc

Article #10059

Back to comp.sys.ibm.pc.misc Previous Next

#10059

From: William Bushing
Date: Wed, 22 May 1991 04:23

13 lines
1004 bytes

Here's dumb beginner question number 102748...

I have an old (ancient?) Compaq Deskpro 8086 computer with a
Seagate ST-225 20 Meg hard drive in it. I'm thinking of putting
a Seagate ST-251-1 drive in but it suddenly dawned on me that
I'm not sure how! I've replaced plenty of drives in AT and 386
machines with BIOS's accessible via SETUP. How does one inform
the Compaq 8086 of a drive's configuration? I have never had to
deal with the Compaq's innards other than a board put in shortly
after I got the system in 1986 or so. Thanks for tips on how to
proceed... or if I should (or can) proceed.

Bill Bushing

Technical Details

Message-ID: <11478@hub.ucsb.edu>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!ucsd!hub.ucsb.edu!ucsbuxa!6500boo

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!ucsd!hub.ucsb.edu!ucsbuxa!6500boo
From: 6500boo@ucsbuxa.ucsb.edu (William Bushing)
Newsgroups: comp.sys.ibm.pc.misc
Subject: Adding Hard Drive to Compaq Deskpro 8086
Message-ID: <11478@hub.ucsb.edu>
Date: 22 May 91 04:23:40 GMT
Sender: news@hub.ucsb.edu
Distribution: comp
Lines: 13