🚀 go-pugleaf

In article <1991Jun14.070037.17625@nntp-server.caltech.edu>,
	nyet@nntp-server.caltech.edu (n liu) writes...
>
>	BUFFERS=4
>	FCBS=1
>	FILES=20
>	STACKS=0,0
> 
>I assume that by setting the buffers,fcbs, and stack vars so small you can
>save a couple of K. How low is "safe" for most uses (windows, mathematica,
>etc. etc.).

Some guidelines that I use:

1.  You can set BUFFERS real low if you use some other disk caching
    software (SMARDRV, HYPERDSK, SUPERPCK, PC-CACHE, etc.).

2.  FCBS can be set to 1 unless you run a lot of old (pre-DOS 2.x) programs.

3.  Stacks 0,0 is recommended by Quarterdeck (and I think Microsoft too).

4.  I usually set FILES=8 in my CONFIG.SYS and use the QEMM FILES=30 command
    to load the other 22 into high RAM.

- Jim

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

"The opinions expressed here in no way represent the views of Digital
 Equipment Corporation."

James J. Reisert                Internet:  reisert@mast.enet.dec.com
Digital Equipment Corp.         UUCP:      ...decwrl!mast.enet!reisert
146 Main Street			Voice:     508-493-5747
Maynard, MA  01754		FAX:       508-493-0395