Stacker vs. Xtra Drive

Article View: comp.sys.ibm.pc.misc

Article #1113

Back to comp.sys.ibm.pc.misc Previous Next

#1113

From: Eric Graves
Date: Wed, 26 Aug 1992 19:17

23 lines
1054 bytes

A couple of questions I left out of my other post:

6)  What type of preparation is necessary before installation.  I know
Stacker requires that you reformat your drives that will be stacked,
but what does Xtra Drive require?

7)  How much memory do the drivers consume?

8)  Can the drivers be loaded into high memory under Dos5?

9)  What are potential dangers of using each system.  For instance,
is there a single configuration file which if lost, will cause
me to lose data on all drives which are compressed?



Eric Graves
ecg@controls.ccd.harris.com
-- 
Eric C. Graves
ecg@controls.ccd.harris.com
Standard Disclaimers Apply

Technical Details

Message-ID: <1992Aug26.191751.20289@ccd.harris.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!gatech!darwin.sura.net!mlb.semi.harris.com!controls.ccd.harris.com!ecg

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.ibm.pc.misc
Path: arc1-ca.pugleaf.net!sparky!uunet!gatech!darwin.sura.net!mlb.semi.harris.com!controls.ccd.harris.com!ecg
From: ecg@controls.ccd.harris.com (Eric Graves)
Subject: Stacker vs. Xtra Drive
Message-ID: <1992Aug26.191751.20289@ccd.harris.com>
Originator: ecg@sp1
Sender: ecg@controls (Eric Graves)
Organization: Harris Controls
Date: Wed, 26 Aug 1992 19:17:51 GMT
Lines: 23