Segate ST-11 Rll controller info needed...

Article View: comp.sys.ibm.pc.misc

Article #11687

Back to comp.sys.ibm.pc.misc Previous Next

#11687

From: jeremy zawodny
Date: Sat, 09 Jan 1993 21:14

21 lines
1237 bytes

I recently acquired a used ST-11 RLL Hard Disk controller via 
a transaction on the net.  I am going to use it to repalce my 
dad's dead WD-1002-SRV RLL Controller.  
 
What I need to know it this:  How do I low-level format the 
                              drives using the ST-11?  With 
                              my Western Digital, I used 
                              debug, but I didn't get the manual
                              with the Segate controller.
 
Any help would be appreciated!
 
Jeremy
          



-- 
Jeremy Zawodny, Computer Nerd (student) @ Bowling Green State University

jzawodn@andy.bgsu.edu

Technical Details

Message-ID: <C0Lv05.5G2@andy.bgsu.edu>

Path: arc1-ca.pugleaf.net!sparky!uunet!gatech!usenet.ins.cwru.edu!magnus.acs.ohio-state.edu!bgsuvax!jzawodn

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.ibm.pc.misc,comp.sys.ibm.pc.hardware,comp.os.msdos.misc
Path: arc1-ca.pugleaf.net!sparky!uunet!gatech!usenet.ins.cwru.edu!magnus.acs.ohio-state.edu!bgsuvax!jzawodn
From: jzawodn@bgsu.edu (jeremy zawodny)
Subject: Segate ST-11 Rll controller info needed...
Message-ID: <C0Lv05.5G2@andy.bgsu.edu>
Followup-To: jzawodn@andy.bgsu.edu
Summary: how do I format the driver under a ST-111
Keywords: rll, segate, format, controller
Sender: jzawodn@andy.bgsu.edu (jeremy zawodny)
Organization: Bowling Green State Univ.
Distribution: na
Date: Sat, 9 Jan 1993 21:14:29 GMT
Lines: 22