Re: 1024K on an XT?

Article View: comp.sys.ibm.pc.misc

Article #1190

Back to comp.sys.ibm.pc.misc Previous Next

#1190

From: David T. Dudek
Date: Thu, 27 Aug 1992 18:29

14 lines
1225 bytes

If you can find one around, I have this card called the "AMS [for Advanced
Memory System] HiCard2" which allows you to load drivers, TSR's, RAM-disks
and print spools into the area between 640k and 1024k.  It runs fine on my
WaveMate 286 XT Bullet Board, but you have to be careful as to which
drivers you load into high memory (esp. mouse drivers).  I really don't
know if you can buy one new anywhere though.  One more thing, it will not
allow a LIM 4.0 memory card to work if it is installed.


-- 
--David Thomas Dudek  aka: the "DUDE"  |  "The opinions expressed are those of
  University at Buffalo                |   my alter id, and do not reflect     
  V098PWXS@UBVMS.CC.BUFFALO.EDU        |   gamma rays in any way, shape or 
  dudek@acsu.buffalo.edu               |   form."

Technical Details

Message-ID: <BtnnCF.F29@acsu.buffalo.edu>

Path: arc1-ca.pugleaf.net!sparky!uunet!gatech!rutgers!ub!acsu.buffalo.edu!dudek

References: <2DKPBS7W@dri.com> <1992Aug25.152136.7602@cbfsb.cb.att.com>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!gatech!rutgers!ub!acsu.buffalo.edu!dudek
From: dudek@acsu.buffalo.edu (David T. Dudek)
Newsgroups: comp.sys.ibm.pc.misc
Subject: Re: 1024K on an XT?
Message-ID: <BtnnCF.F29@acsu.buffalo.edu>
Date: 27 Aug 92 18:29:02 GMT
References: <2DKPBS7W@dri.com> <1992Aug25.152136.7602@cbfsb.cb.att.com>
Sender: nntp@acsu.buffalo.edu
Organization: UB
Lines: 14
Nntp-Posting-Host: lictor.acsu.buffalo.edu

Reply to Parent Message