🚀 go-pugleaf

Hi

I have a pentium 233 mhz with a P5tx-bpro motherboard and a Intel
processor. 

Since I upgrade the ram memory to 64 meg. Wen I lit on the computer, the
boot up screen are like the following line, but it's freeze there and the
keyboard don't work and the setup screen wont come wen I press the del
key, I need to switch off and immediately switch on again so it will work
ok.  If I wait too long to switch on again it will be freeze again. 

I put two 32 meg dimm 168 pin ram, on the board;

one are;

32 meg, pc66, hy57v168010d  TC-10 9843a

the other dimm are;

32 meg, pc66, v54c316802vbt10    98450s

In my P5tx-bpro mainboard user's manual they that you need a 168 pin dimm.
3.3 volt edo or sdram.

I seem there's a mistake I made  with my dimm memory.

They are well sit in the dimm memory slot and I did not force them in the
slot, it goes well into the slot.

Wen I lit up the computer and the screen freeze.  Here the line on the
screen at boot; 
 
_______________________________________________________________
 
Award Modular Bios V4.5PG, an energy Star ally
Copyright(C) 1984-98, award software,inc
P5TX-Ppro Ver.3.2  07/28/1998
Pentium-MMX CPU at 233 mhz
Memory test: 65536 ok
Award plug and play Bios extension V1.0A
Copyright(C) 1998, award software, inc
 
 
 
Press DEL to enter setup
08/03/1998-i430TX-P5TXBproC-00
 
______________________________________________________________
 

P5TX - Bpro P.ev:3.1
 
The system chipset are; INTEL 82439TX 430TX
 
The bios ID are; 08/03/1998-i430TX-P5TXBproC-00
 
Processor; P55C PENTIUM MMX 166-233 2.8V
 
On the top of the Processor ; CPU 586 233 MHZ    SIMD38151Y
 
Under the processor;
 
Pentium MMX
FV80503233
SLV27S/2.8V
iA4
C8350400-1241

I've check the 200W Aztec power supply and the 12v. and 5v. and also
the 5v. power good are OK wen I lit up the computer and it's working with
my Win Me .
 
I have a 1.6 g hd on primary master, 3.2 g hd on primary slave, a
cdrom on secondary master. a sound card, a modem, a 4 meg video card.

I did check the jumper on the motherboard and it's all ok.
 
I hope all I wrote are ok so you can help me.
 
Thank
 
Gaetan