🚀 go-pugleaf

In article <henrik.13.0@itekiris.kjemi.unit.no> henrik@itekiris.kjemi.unit.no (Henrik Gudbrandsen) writes:
>In article <Bwss5y.Bxx@ga.com> neihart@ga.com (Carl Neihart) writes:
>>In article <.2.0@>, @ (Henrik Gudbrandsen) writes:
>>|> Our department are connected to a campus network and have access to mail/
>>|> news etc.  In addition we are using Lantastic for printersharing/
>>|> fileserver. (100+ users)
>>|> 
>>|> My question is: Is there a way to run both tcp/ip-based software (clarcson 
>>|> drivers (?)) and Lantastic at the same time on one network card?
>>|> 
>>|> We use WD8003/WD8013 network cards.
>>|> 
>>|> Any comments would be appreciated.
>>|> 
>>|> 
>>|> Henrik Gudbrandsen   (henrik@itekiris.kjemi.unit.no)
>>|> Section of Applied Electrochemistry
>>|> SINTEF Metallurgy
>>
>>no...
>>
>>you need to ditch Lantastic, and go with Windows for Workgroups 
>>from Microsoft, in TCP/IP mode...
>>
>>regards,
>>carl neihart 10/27/92

I don't know about Lantastic, but we're doing just that with Netware Lite.
What we've done is to use ODI drivers with a ODI <--> PKT converter, so to
TCP/IP (NCSA TELNET) it looks just like a Clarkson driver & Novell is
quite happy also.  Anyway, all this stuff is available from FTP sites.
Something like this:

	Telnet ---- ODI2PKT ----\
                                 ---- ODIDRV ---- [NETWORK CARD]
        Novell ---- IPXODI -----/


--
Tim McNamara                            Send lawyers, guns, and money.
tjm@jester.hw.stratus.com
Stratus Computer Corp.                               __|__
Hardware Engineer                             x------O(o)O------x