AT Problem

Article View: comp.sys.ibm.pc.misc

Article #2078

Back to comp.sys.ibm.pc.misc Previous Next

#2078

From: Bill Darden <wdarden>
Date: Fri, 27 Jul 1990 15:02

16 lines
980 bytes

Hi all,

I am having a problem with a 12 MHz AT mother board that only
appears when I run at 0 wait states @ 12 MHz and not at 1 wait state
@ 12 MHz.  It will lock up with the same Memory Parity Error
0B86:006E message.  The 41256-80 RAM is known good and I have even
switched banks to see if the problem followed one of the chips.

Any suggestions on where to look for this problem would greatly be
appreciated.

Thanks,

BiLL

(213) 541-2020

Technical Details

Message-ID: <8558@gremlin.nrtc.northrop.com>

Path:

arc1-ca.pugleaf.net!utzoo!attcan!uunet!zephyr.ens.tek.com!uw-beaver!mit-eddie!snorkelwacker!usc!venera.isi.edu!gremlin!nrtc.nrtc.northrop.com!wdarden

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!zephyr.ens.tek.com!uw-beaver!mit-eddie!snorkelwacker!usc!venera.isi.edu!gremlin!nrtc.nrtc.northrop.com!wdarden
From: wdarden@nrtc.nrtc.northrop.com (Bill Darden <wdarden>)
Newsgroups: comp.sys.ibm.pc.misc
Subject: AT Problem
Message-ID: <8558@gremlin.nrtc.northrop.com>
Date: 27 Jul 90 15:02:28 GMT
Sender: news@gremlin.nrtc.northrop.com
Reply-To: wdarden@nrtc.nrtc.northrop.com (Bill Darden <wdarden>)
Organization: Northrop Research & Technology Center, Palos Verdes, CA
Lines: 16