Re: OS/2 and RLL controllers

Article View: comp.sys.ibm.pc.misc

Article #2265

Back to comp.sys.ibm.pc.misc Previous Next

#2265

From: Mike Brim - Product Assurance
Date: Mon, 06 Aug 1990 12:13

17 lines
1257 bytes

In article <788@usage.csd.unsw.oz.au> dennett@usage.csd.unsw.oz.au (Dennett Jaques) writes:

> I'm trying to configure OS/2 1.21 (Microsoft Version) on a 286. I dont get
> very far at all though, because my machine hangs when I run the install disk.
> 
> I have a feeling that OS/2 can not recognise my hard disk.
> I have a Mitsubishi 65Mbyte RLL drive with an Adaptec 2372B disk controller.
> 
> This controller has its own BIOS which is probably the root of the problem.

I'm running OS/2 1.2 on an Adaptec 2372B with a Microscience 1060 HD.  The 
computer is a Vector 20MHz 286 (uses C&T) with Award 3.03 BIOS.  

What is the error message (if any) and on what screen does it hang?  Also if you
are using the 63 sector translation, back up the hd and try it without this
option.

Technical Details

Message-ID: <13628@cbmvax.commodore.com>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!snorkelwacker!mit-eddie!rutgers!cbmvax!brim

References: <788@usage.csd.unsw.oz.au>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!snorkelwacker!mit-eddie!rutgers!cbmvax!brim
From: brim@cbmvax.commodore.com (Mike Brim - Product Assurance)
Newsgroups: comp.sys.ibm.pc.misc
Subject: Re: OS/2 and RLL controllers
Keywords: Adaptec 2372B
Message-ID: <13628@cbmvax.commodore.com>
Date: 6 Aug 90 12:13:55 GMT
References: <788@usage.csd.unsw.oz.au>
Reply-To: brim@cbmvax (Mike Brim - Product Assurance)
Organization: Commodore, West Chester, PA
Lines: 17

Reply to Parent Message