Article View: comp.sys.ibm.pc.misc
Article #2371Re: QEMM 5.0 & 3Com 3C503 Conflict
From: kuo
Date: Sat, 11 Aug 1990 04:53
Date: Sat, 11 Aug 1990 04:53
16 lines
1154 bytes
1154 bytes
In article <1033@lehi3b15.csee.Lehigh.EDU>, flash@lehi3b15.csee.Lehigh.EDU (Stephen Corbesero) writes: > I was installing my new 386 machine (Gateway-2000 33Mhz, 150MB ESDI, > 4MB, Micronics Motherboard) and I ran into a serious snag. I was able > to get QEMM up and running quite nicely until I installed my ethernet > card, a 3Com 3C503. If the card is installed, the machine will cold > boot itself almost immediately after QEMM displays its signon > message. Did you tried explicitly exclude the RAM buffer area of 3c503 using the /X... switch? I use QEMM+DV and micom NI5210 with excellent result. Do you have a boot ROM on your card? I don't. And I don't run NOvell. good luck! kuo@oregon.uoregon.edu
Technical Details
Message-ID:
<20012.26c32cdd@oregon.uoregon.edu>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!wuarchive!mit-eddie!uw-beaver!milton!oregon!kuoReferences:
<1033@lehi3b15.csee.Lehigh.EDU>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!wuarchive!mit-eddie!uw-beaver!milton!oregon!kuo From: kuo@oregon.uoregon.edu Newsgroups: comp.sys.ibm.pc.misc Subject: Re: QEMM 5.0 & 3Com 3C503 Conflict Message-ID: <20012.26c32cdd@oregon.uoregon.edu> Date: 11 Aug 90 04:53:33 GMT References: <1033@lehi3b15.csee.Lehigh.EDU> Distribution: usa Organization: University of Oregon Lines: 16