Replacement of PS2 Mod 60 HD

Article View: comp.sys.ibm.pc.misc

Article #2400

Back to comp.sys.ibm.pc.misc Previous Next

#2400

From: CJ Pilzer
Date: Wed, 15 Aug 1990 04:04

24 lines
1581 bytes

I have an IBM PS/2 mod 60-041.  This has a 44 meg mfm drive.  I need more
disk space.  Another IBM HD is very expensive.  Compatible drives by other
companies like CMI are also some what expensive for such a small slow drive.
I would like to get a faster ESDI or SCSI drive.  I guess I could get an
ESDI controller like used in the mod 60-071, but I think something from
Adaptec or Western Digital, stc might give better value.  Can anyone help
me with the following?

Has anyone used a controller other than IBM's in a mod 60?  Whose and how
did it work?

Since the mod 60 uses software to setup the configuration, how could I get
the computer to recognize a non-IBM controller and disk drive which did not
have the IBM fingerprint or identifing information builtin?

I would like to get a HD disk of about 200 megs and 16 - 24 ms access time.
and a tranfer rate of 10 or 15 which is most economical and reliable.  Any
suggestions of solutions that have been used successfully by others would be
appreciated.

Could I get an IBM ESDI adapter and use some disk drive other than the IBM
71 Mb. drive?

-- cjp@beartrk.beartrack.com

Technical Details

Message-ID: <437@beartrk.beartrack.com>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!mailrus!uunet!beartrk!cjp

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!mailrus!uunet!beartrk!cjp
From: cjp@beartrk.beartrack.com (CJ Pilzer)
Newsgroups: comp.sys.ibm.pc.misc,comp.sys.ibm.pc.hardware
Subject: Replacement of PS2 Mod 60 HD
Keywords: PS/2 hard drives controllers esdi scsi
Message-ID: <437@beartrk.beartrack.com>
Date: 15 Aug 90 04:04:26 GMT
Distribution: usa
Organization: Bear Track Computer Co., Takoma Park, MD.
Lines: 24