Request for AT&T 6300 DTC switch settings (RomBIOS v1.43)

Article View: comp.sys.ibm.pc.misc

Article #2823

Back to comp.sys.ibm.pc.misc Previous Next

#2823

From: Anthony Olejnik
Date: Tue, 28 Aug 1990 20:29

19 lines
1215 bytes

My AT&T 6300 has a DTC (Data Technology Corp.) hard disk controller.
This, from what I understand, came standard with the 6300.
There is a bank of 8 DIP switches on this card which defines
the type of drive(s) it can support.

I would like to replace the original Olivetti drive with a
Seagate ST-212.  However, I need to know what to set the switches to.

I'm using RomBIOS v1.43, which supports a number of manufacturers
drives.

So, can anyone tell me if the RomBIOS supports a Seagate ST-212?
And, what to set the DTC controller's switches to?

*ANY* help would be *GREATLY* appreciated.

Thanks in advance.

--tony

Technical Details

Message-ID: <28923@netnews.upenn.edu>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!sdd.hp.com!elroy.jpl.nasa.gov!lll-winken!cert!netnews.upenn.edu!scotty.dccs.upenn.edu!tony

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!sdd.hp.com!elroy.jpl.nasa.gov!lll-winken!cert!netnews.upenn.edu!scotty.dccs.upenn.edu!tony
From: tony@scotty.dccs.upenn.edu (Anthony Olejnik)
Newsgroups: comp.sys.ibm.pc.misc
Subject: Request for AT&T 6300 DTC switch settings (RomBIOS v1.43)
Message-ID: <28923@netnews.upenn.edu>
Date: 28 Aug 90 20:29:18 GMT
Sender: news@netnews.upenn.edu
Reply-To: tony@scotty.dccs.upenn.edu (Anthony Olejnik)
Distribution: usa
Organization: University of Pennsylvania
Lines: 19