"I/O card parity interrupt" error message

Article View: comp.sys.ibm.pc.misc

Article #2874

Back to comp.sys.ibm.pc.misc Previous Next

#2874

From: (Tom) Qi Xiong Ruan
Date: Fri, 31 Aug 1990 06:33

16 lines
1347 bytes

Re: I/O card parity interrupt at 156A: 006E

I have a 386 64k cache IBM compatible computer, phoenix BIOS 1.10.14,
4 meg RAM.
I use com1 for mouse, com4 for modem (I try to set my modem to com2,
but it doesn't work. I believe that com1 and com3 using IRQ4 (interrrupt 4),
com2 and com4 using IRQ3. so I have to set it to com4).
when I am using window 3, and inside window3 using procomm plus for dialing,
then switch back to window3 programmer manager,  it will get me message:
"I/O card parity interrupt at 156A: 006E", then "non-recoverable application
error", it the system crashes.  Even I am not using window 3 and only using
procomm plus for dialing, I am encountering the same problem.
Can anyone help to locate the problem.  Is RAM memory chip, BIOS, I/O card,
or hard disk problem?

I am appreciated if you can mail to me at qruan@viewprint.berkeley.edu.

Technical Details

Message-ID: <1990Aug31.063314.7957@agate.berkeley.edu>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!usc!apple!agate!usenet

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!usc!apple!agate!usenet
From: qruan@viewprint.berkeley.edu ((Tom) Qi Xiong Ruan)
Newsgroups: comp.sys.ibm.pc.misc
Subject: "I/O card parity interrupt" error message
Message-ID: <1990Aug31.063314.7957@agate.berkeley.edu>
Date: 31 Aug 90 06:33:14 GMT
Sender: usenet@agate.berkeley.edu (USENET Administrator)
Organization: Berkeley Physiological Optics
Lines: 16