Parity Error

Article View: comp.sys.ibm.pc.misc

Article #2928

Back to comp.sys.ibm.pc.misc Previous Next

#2928

From: Timothy Margush
Date: Tue, 04 Sep 1990 17:24

16 lines
1120 bytes

When I exit PCTOOLS 5.1 Shell (resident mode), I get the following message
on the screen (in big letters)

off board parity error
hex address 0000:0002
system halted.

warm reboots do not allow the system to restart.  the reset button or power
off/on allows the system to boot again OK.  The error is repeatable if I enter
the shell using the hotkey and then attempt to exit.

I am using a 386/25 with a 387, VGA, Modem, serial, hard drive, 2 floppies.
I removed the modem and serial card, no change in behavior.  I can't
really remove the other cards or I won't be able to see or boot.

I would appreciate any suggestions.

Technical Details

Message-ID: <620@VAX1.CC.UAKRON.EDU>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!tut.cis.ohio-state.edu!VAX1.CC.UAKRON.EDU!r1marg

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!tut.cis.ohio-state.edu!VAX1.CC.UAKRON.EDU!r1marg
From: r1marg@VAX1.CC.UAKRON.EDU (Timothy Margush)
Newsgroups: comp.sys.ibm.pc.misc
Subject: Parity Error
Summary: What does OFF BOARD PARITY ERROR mean
Keywords: Parity Error
Message-ID: <620@VAX1.CC.UAKRON.EDU>
Date: 4 Sep 90 17:24:40 GMT
Reply-To: r1marg@VAX1.CC.UAKRON.EDU (Timothy Margush)
Organization: U of Akron Computer Center, Ohio
Lines: 16