Building a Micronics based system.

Article View: comp.sys.ibm.pc.misc

Article #3317

Back to comp.sys.ibm.pc.misc Previous Next

#3317

From: Michael Almond
Date: Fri, 21 Sep 1990 04:45

19 lines
1206 bytes

	I am planning to build a 386/33 system myself using a Micronics
motherboard with 4MB, SVGA card, NEC 4D, 100MB SCSI (conner).  The system
will be running Esix.  After thinking about it for a while it seems
pretty straight forward, but then again it might not.

	I was wondering if anyone else has had experience with building
systems like this and can give me any pointers or things to watch out
for.

	Are there any books that might help in doing this?

	Any help would be greatly appreciated.


---
Michael R. Almond                                 mra@srchtec.uucp (registered)
search technology, inc.                           gatech.edu!stiatl!srchtec!mra
Atlanta, Georgia                                  (404) 441-1457 (work)

Technical Details

Message-ID: <219@srchtec.UUCP>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!wuarchive!emory!stiatl!srchtec!srchtec.uucp!mra

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!wuarchive!emory!stiatl!srchtec!srchtec.uucp!mra
From: mra@srchtec.uucp (Michael Almond)
Newsgroups: comp.sys.ibm.pc.misc,comp.sys.ibm.pc.hardware
Subject: Building a Micronics based system.
Message-ID: <219@srchtec.UUCP>
Date: 21 Sep 90 04:45:47 GMT
Sender: mra@srchtec.UUCP
Followup-To: comp.sys.ibm.pc
Distribution: usa
Organization: search technology, inc.
Lines: 19