Article View: comp.sys.ibm.pc.misc
Article #3366Re: Difference between a 386 and a 386sx
From: Russell Poffenberger
Date: Thu, 20 Sep 1990 18:52
Date: Thu, 20 Sep 1990 18:52
21 lines
1601 bytes
1601 bytes
In article <4388@bwdls58.UUCP> mlord@bwdls58.bnr.ca (Mark Lord) writes:
>>This suggests that a way to distinguish a 386dx from a 386sx in software
>>would be to put some value in existing memory at address 0x00xxxxxx
>>and read it from address 0x01xxxxxx. If it comes out the same you would
>>be running on a 386sx (not having the upper 8 bits of address bus),
>>otherwise a 386dx.
>
>But not many machines have physical memory in the hundreds of megabytes
>ranges.. so regrettably, I doubt that this would work in practice.
>
>Use virtual memory you say? Well.. in that case a 386sx will do the
>exact same internal translation as a 386dx, producing no observable
>differences either. Better luck next time.
In addition, I think you would have to be in protected mode. This complicates
things. In real mode, I believe the addresses "wrap around" at 1Mb.
Russ Poffenberger DOMAIN: poffen@sj.ate.slb.com
Schlumberger Technologies UUCP: {uunet,decwrl,amdahl}!sjsca4!poffen
1601 Technology Drive CIS: 72401,276
San Jose, Ca. 95110 (408)437-5254
Technical Details
Message-ID:
<1990Sep20.185214.780@sj.ate.slb.com>Path:
arc1-ca.pugleaf.net!utzoo!attcan!uunet!sjsca4!poffenReferences:
<935@sppy00.UUCP> <1477@sirius.ucs.adelaide.edu.au> <1412@svin02.info.win.tue.nl> <4388@bwdls58.UUCP>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!sjsca4!poffen From: poffen@sj.ate.slb.com (Russell Poffenberger) Newsgroups: comp.sys.ibm.pc.misc Subject: Re: Difference between a 386 and a 386sx Message-ID: <1990Sep20.185214.780@sj.ate.slb.com> Date: 20 Sep 90 18:52:14 GMT References: <935@sppy00.UUCP> <1477@sirius.ucs.adelaide.edu.au> <1412@svin02.info.win.tue.nl> <4388@bwdls58.UUCP> Reply-To: poffen@sj.ate.slb.com (Russell Poffenberger) Organization: Schlumberger Technologies, San Jose, CA. Lines: 21