🚀 go-pugleaf

Sorry for posting, but e-mail to uhcc.hawaii.edu keeps bouncing.

In article <9558@uhccux.uhcc.Hawaii.Edu> wan@uhccux.UUCP (Dadong Wan) writes:
>Does anyone out there know how I can make an SCSI HD driver (Mactor XT8380,
>360 MB) work with QEMM386? I've tried to run OPTIMIZE after I installed the
>the HD driver, but it reboots itself after the first 2 steps (supposed to
>run the 3rd step). I would like to load some device drivers and buffers to
>the high memory so I can have at least 600K conventional Ram for my 
>application programs. The machine I have is a Rayton 25Mhz 385 with 4MB ram.
>Any help from any of you will be greately appreciated.
>
>--Dadong
>(wan@uhccux.uhcc.hawaii.edu, wan@uhccux.bitnet)

 
I've never seen your particular driver, but I know I had some problems with
the Columbia Data SCSI ROM (usually residing on a Western Digital card). The
initial symptoms were identical to yours: quits the setup after 2 steps.
The problem was solved by calling Columbia Data to get a new release of their
ROM: it was an undersight on behalf of the original ROM programmers. It is
quite possible that you have a similar problem.

+-----------------------------------------------------------------------------+
-- 
+-----------------------------------------------------------------------------+
|Grant C Blair, DuPont Imaging Systems, Newark, DE 19702, USA                 |
|blair@pyro.ei.dupont.com (192.58.195.64)        (302)-733-9533               |
+-----------------------------------------------------------------------------+

-- 
+-----------------------------------------------------------------------------+
|Grant C Blair, DuPont Imaging Systems, Newark, DE 19702, USA                 |
|blair@pyro.ei.dupont.com (192.58.195.64)        (302)-733-9533               |
+-----------------------------------------------------------------------------+