Re: Hypercard on DOS

Article View: comp.sys.ibm.pc.misc

Article #3681

Back to comp.sys.ibm.pc.misc Previous Next

#3681

From: Roger Hadgraft
Date: Thu, 04 Oct 1990 23:07

18 lines
1330 bytes

In article <Fvm1swh2@cs.psu.edu>, melling@cs.psu.edu (Michael D Mellinger) writes:
> Is there a program for DOS machines that will run unaltered Hypercard
> stacks?  We have ToolBook, but we will still have to rewrite the
> scripts.  A program that will run Hypercard stacks w/o allowing
> changes would work too.
>
There is a conversion utility which converts Hypercard stacks into TollBook
books. It's called I ConvertIt! from Heizer Software
(Pleasant Hill, CA, USA, Phone 415-943-7667).

WindowCraft has just been released. It allows Hypercard stacks to be run
unaltered (I think), as does Plus, which has either just been released, or is
about to be released.
--
Roger Hadgraft                  |  hadgraft@civeng.monash.edu.au
Lecturer in Civil Engineering   |
Monash University               |  phone:  +61 3 565 4983
Clayton, Vic. 3168. Australia.  |  fax:    +61 3 565 4944 or 3409

Technical Details

Message-ID: <56749.270c4d3c@vaxc.cc.monash.edu.au>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!munnari.oz.au!bruce!monu1!vaxc!cie590l

References: <Fvm1swh2@cs.psu.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!munnari.oz.au!bruce!monu1!vaxc!cie590l
From: hadgraft@civeng.monash.edu.au (Roger Hadgraft)
Newsgroups: comp.sys.ibm.pc.misc,comp.os.msdos.programmer
Subject: Re: Hypercard on DOS
Message-ID: <56749.270c4d3c@vaxc.cc.monash.edu.au>
Date: 4 Oct 90 23:07:07 GMT
References: <Fvm1swh2@cs.psu.edu>
Distribution: comp
Organization: Civil Engineering, Monash University, Australia
Lines: 18

Reply to Parent Message