Article View: comp.sys.ibm.pc.misc
Article #3744Re: SCSI driver & QEMM
From: Scott R. Myers
Date: Sun, 07 Oct 1990 17:11
Date: Sun, 07 Oct 1990 17:11
32 lines
1323 bytes
1323 bytes
In article <1083@applix.com> scotte@applix.com (Scott Evernden) writes:
>In article <9558@uhccux.uhcc.Hawaii.Edu> wan@uhccux.UUCP (Dadong Wan) writes:
>Does anyone out there know how I can make an SCSI HD driver (Mactor XT8380,
>360 MB) work with QEMM386?
I had a problem with using a Plus Impulse Drive and a IDE drive where
in both cases the controller card had its own BIOS. The fix for me in
this case was to find the Memory address for the cards and put this in
my config.sys
device=qemm.sys exclude=c800-c9ff ram
^^^^^^^^^^^^^^^^^
This piece right here tells qemm to stay away from
segment of memory.
Hope this helps...
srm
--
Scott R. Myers
Snail: 26 Stiles Street Phone:(201)352-4162
Apartment 18
Elizabeth, NJ 07201
Arpa: srm@dimacs.rutgers.edu Uucp: ..!dimacs!srm
"... No matter where you go, there you are ..."
Technical Details
Message-ID:
<Oct.7.13.11.43.1990.7079@dimacs.rutgers.edu>Path:
arc1-ca.pugleaf.net!utzoo!attcan!utgpu!news-server.csri.toronto.edu!rutgers!dimacs.rutgers.edu!srmReferences:
<9558@uhccux.uhcc.Hawaii.Edu> <1083@applix.com>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!news-server.csri.toronto.edu!rutgers!dimacs.rutgers.edu!srm From: srm@dimacs.rutgers.edu (Scott R. Myers) Newsgroups: comp.sys.ibm.pc.misc Subject: Re: SCSI driver & QEMM Message-ID: <Oct.7.13.11.43.1990.7079@dimacs.rutgers.edu> Date: 7 Oct 90 17:11:43 GMT References: <9558@uhccux.uhcc.Hawaii.Edu> <1083@applix.com> Distribution: usa Organization: Rutgers University Lines: 32