Re: In VGA hell... help?

Article View: comp.sys.ibm.pc.misc

Article #4058

Back to comp.sys.ibm.pc.misc Previous Next

#4058

From: ersys!davem
Date: Tue, 23 Oct 1990 17:56

25 lines
1891 bytes

Justin_Randall_Padawer@cup.portal.com writes:

> I am trying to get a standard 8-bit vga card to work in my 286 vlsi 
> machine.  The card does work (or let's assume this for now).  I can get
> it to work but no software will put an image on the monochrome vga screen
> in vga mode!  I did use the setup program for the computer and the 
> vgaplus.exe program to switch modes etc.  No dipswitch on the 286 board,
> just a jumper to select mono or color; I have the jumper set to color
> ...should I try mono???  I can use the vgaplus.exe program to switch to
> other modes, and software all works fine in cga mode, but I want to use
> the vga resolution.  YES, the software I'm trying to use does support 
> vga resolution.  Can anybody please steer me in the right direction 
> anyway???   Drowning in vga hell here...  Randy Padawer
> Internet: Justin_Randall_Padawer@cup.portal.com

  Whose standard 8-bit card?  What's the clock speed of your motherboard?
  I ask because I have an ATI VGA VIP card that works well in a 10 mHz
unit and chokes in a 12 mHz unit ... and I have to assume it just won't
support the higher speed...


Dave McCrady                     |  ersys!davem@nro.cs.athabascau.ca
Edmonton Remote Systems          |     
13324-138 Street                 |  BBS:   (403)-454-6093  300-9600 bps (HST)
Edmonton, AB Canada  T5L 2B4     |  USENET (403) 452-3254  300-2400 bps

Technical Details

Message-ID: <gDaiR2w163w@ersys.uucp>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!sdd.hp.com!uakari.primate.wisc.edu!aplcen!aplcomm!uunet!van-bc!ubc-cs!alberta!aunro!ersys!davem

References: <35108@cup.portal.com>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!sdd.hp.com!uakari.primate.wisc.edu!aplcen!aplcomm!uunet!van-bc!ubc-cs!alberta!aunro!ersys!davem
From: ersys!davem@nro.cs.athabascau.ca
Newsgroups: comp.sys.ibm.pc.misc,comp.sys.ibm.pc.hardware
Subject: Re: In VGA hell... help?
Message-ID: <gDaiR2w163w@ersys.uucp>
Date: 23 Oct 90 17:56:51 GMT
References: <35108@cup.portal.com>
Organization: Edmonton Remote Systems, Edmonton, AB, Canada
Lines: 25

Reply to Parent Message