🚀 go-pugleaf

The resistor in question is called a terminating resistor.  Now, as far as
I know, the resistor was only used on the original PC/XT systems.  The
cable that connected the floppies was a simple straight ribbon.  The resistor
was used to "tell" the controller that the drive with the resistor was the
A drive.  (at least on a true IBM PC . the B drive is the first drive on the
cable and the A is the last)  On the AT computer however, the floppy cable
was designed with a few wires twisted.  This twist is what determined which
drive was A or B.

If you're using this drive in a computer with a simple straight ribbon cable,
you will need to find a group of jumpers near the connector.  Put a jumper
over the pins for DS1 for drive A or DS2 for drive B.  On an AT, I guess all
you need to do is put it on DS1 and the cable does the rest.


      If somebody out there knows that this is wrong, please tell me.
  ---------------------------------------------------------------------------
  |    OOO                       |                                          |
  |   O   O                SSS   |  Why do today what's due tomorrow?       |
  |   O   O  PPP   U   U  S      |                                          |
  |   O   O  P  P  U   U   SSS   |  Hey...sounds good to me!  =-)           |
  |   O   O  PPP   U   U      S  |                                          |
  |    OOO   P      UUU   SSSS   |  KDM101@PSUVM         O04@PSUVM          |
  |          P                   |  KXM@PSUARCH          kmaher@psusun01    |
  ---------------------------------------------------------------------------
   Why should I want to disclaim anything???  It only makes me look guilty!