Article View: comp.sys.ibm.pc.misc
Article #5743Toshiba XM3301B CDROM on Adaptec AHA1542B
From: Russ Poffenberger
Date: Tue, 06 Oct 1992 22:55
Date: Tue, 06 Oct 1992 22:55
19 lines
1204 bytes
1204 bytes
I have been unable to get a Toshiba XM3301B CDROM drive to work under DOS
with my Adaptec AHA1542B SCSI controller. I have the Adaptec ASW-410
Toshiba drivers installed, and mscdex 2.21. Both drivers load normally,
mscdex claims to be installing the CDROM unit as drive E:, but attempts
at accessing it (eg. dir E:) also result in the error "Disk is not High
Sierra or ISO9660 format" and the usual Abort, Retry, Fail.
Note that this EXACT same hardware setup running OS/2 2.0 has NO problems at
all reading the drive.
Any clues are appreciated.
Thanks,
Russ Poffenberger DOMAIN: poffen@sj.ate.slb.com
Schlumberger Technologies ATE UUCP: {uunet,decwrl,amdahl}!sjsca4!poffen
1601 Technology Drive CIS: 72401,276
San Jose, Ca. 95110 Voice: (408)437-5254 FAX: (408)437-5246
Technical Details
Message-ID:
<1992Oct6.225506.24517@sj.ate.slb.com>Path:
arc1-ca.pugleaf.net!sparky!uunet!sjsca4!poffenShow Full Headers
Complete Article Headers
Newsgroups: comp.sys.ibm.pc.misc Path: arc1-ca.pugleaf.net!sparky!uunet!sjsca4!poffen From: poffen@sj.ate.slb.com (Russ Poffenberger) Subject: Toshiba XM3301B CDROM on Adaptec AHA1542B Message-ID: <1992Oct6.225506.24517@sj.ate.slb.com> Reply-To: poffen@sj.ate.slb.com (Russ Poffenberger) Organization: Schlumberger Technologies, San Jose, CA. Date: Tue, 6 Oct 92 22:55:06 GMT Lines: 19