Re: How does one install an IDE drive?

Article View: comp.sys.ibm.pc.misc

Article #8464

Back to comp.sys.ibm.pc.misc Previous Next

#8464

From: Ralph Sims
Date: Tue, 19 Mar 1991 06:14

15 lines
1149 bytes

rschmidt@copper.ucs.indiana.edu (roy schmidt) writes:

> Since your motherboard is 1989 vintage, your BIOS probably is, as well.
> To use an IDE drive, you will need to replace the BIOS with one dated
> 4/90 or later.  And, you will need an adaptor card (only about $20 for
> single hard drive, $50 for dual hard drive/dual floppy.)

We have a COMPAQ DESKPRO 386/16 with a 1986 BIOS.  Supports IDE
drives just fine (the original CDC and now a MicroScience, and we
had a Conner in it for a while).

--
                    halcyon!ralphs@seattleu.edu
  The 23:00 News and Mail Service - +1 206 292 9048 - Seattle, WA USA
                 +++ A Waffle Iron, Model 1.64 +++

Technical Details

Message-ID: <6TL2y3w164w@halcyon.uucp>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!cs.utexas.edu!rice!uw-beaver!milton!sumax!halcyon!ralphs

References: <1991Mar19.032138.1996@bronze.ucs.indiana.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!cs.utexas.edu!rice!uw-beaver!milton!sumax!halcyon!ralphs
From: halcyon!ralphs@seattleu.edu (Ralph Sims)
Newsgroups: comp.sys.ibm.pc.misc
Subject: Re: How does one install an IDE drive?
Message-ID: <6TL2y3w164w@halcyon.uucp>
Date: 19 Mar 91 06:14:04 GMT
References: <1991Mar19.032138.1996@bronze.ucs.indiana.edu>
Organization: The 23:00 News and Mail Service
Lines: 15

Reply to Parent Message