IBM Game Port Pinouts

Article View: comp.sys.ibm.pc.misc

Article #8836

Back to comp.sys.ibm.pc.misc Previous Next

#8836

From: James Sonnenmeier
Date: Tue, 02 Apr 1991 00:34

15 lines
1355 bytes

To anyone on the net ... I am building a joystick for my AT .. I have a two
pot gimbal w/ trims and two buttons ... I had it at one time but I need the 
pinouts of the 15 pin game port connector .. where do I assign which wire?

I know that its not terribly complicated but I just don't have a source for 
info .. ANY help would be greatly appreciated. :)

==========================================================================
Jim Sonnenmeier                  !
TRLJIM@UBVMS.BITNET  : BITNET    !    :-)
[72361,2133]  : CompuServe       !    I like to think that time and space
University at Buffalo            !    are ours to use :) ... The sky is my
Department of Mechanical/        !    joy, the wind is my lift.
Aerospace Engineering            !  
==========================================================================

Technical Details

Message-ID: <68267@eerie.acsu.Buffalo.EDU>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!ub!ubvmsa.cc.buffalo.edu!trljim

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!ub!ubvmsa.cc.buffalo.edu!trljim
From: trljim@ubvmsa.cc.buffalo.edu (James Sonnenmeier)
Newsgroups: comp.sys.ibm.pc.misc
Subject: IBM Game Port Pinouts
Message-ID: <68267@eerie.acsu.Buffalo.EDU>
Date: 2 Apr 91 00:34:24 GMT
Sender: news@acsu.Buffalo.EDU
Reply-To: trljim@ubvmsa.cc.buffalo.edu
Organization: University at Buffalo
Lines: 16
Nntp-Posting-Host: ubvmsa.cc.buffalo.edu
News-Software: VAX/VMS VNEWS 1.3-4.5