Re: Soundblaster (not pro) hangs with Digital I/O

Article View: comp.sys.ibm.pc.misc

Article #911

Back to comp.sys.ibm.pc.misc Previous Next

#911

From: ONG ENG TENG
Date: Tue, 14 Apr 1992 18:33

14 lines
1222 bytes

From article <kum1amINN9mc@news.bbn.com>, by saustin@bbn.com (Steve Austin):
> I have a Sounblaster (V1.5 with the 2.0 software) in my no-name
> 386-33MHz system.  The problem that I am having is that it hangs
> when using digitized sound.  I have taken everything out of the
> bus except the video card (Super VGA) and the HD/FD controler.
> Everything is fine, however, when emulating the Adlib.
> 
> My suspicion is centered on the DMA, since I have tried all
> IRQ lines and IRQ7 does no seem to be used by anything else.
> Is it likely that either the video card or the disc controller
> are intefering with the Soundblaster?

Your problem has been discussed many times before in this group and solutions
are available.  Please check if FAQ has it.

Technical Details

Message-ID: <1992Apr14.183318.4919@a.cs.okstate.edu>

Path: arc1-ca.pugleaf.net!sparky!uunet!think.com!mips!darwin.sura.net!convex!constellation!a.cs.okstate.edu!ong

References: <kum1amINN9mc@news.bbn.com>

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.ibm.pc.misc,rec.games.misc,comp.sys.ibm.pc.hardware
Path: arc1-ca.pugleaf.net!sparky!uunet!think.com!mips!darwin.sura.net!convex!constellation!a.cs.okstate.edu!ong
From: ong@a.cs.okstate.edu (ONG ENG TENG)
Subject: Re: Soundblaster (not pro) hangs with Digital I/O
References: <kum1amINN9mc@news.bbn.com>
Message-ID: <1992Apr14.183318.4919@a.cs.okstate.edu>
Organization: Oklahoma State University
Date: Tue, 14 Apr 92 18:33:18 GMT
Lines: 14

Reply to Parent Message