Windows 3.0, QEMM Stealth, and 4DOS

Article View: comp.sys.ibm.pc.misc

Article #919

Back to comp.sys.ibm.pc.misc Previous Next

#919

From: Josh Brian Mastronarde
Date: Wed, 15 Apr 1992 04:49

15 lines
1215 bytes

Has anyone else had problems with Windows 3.0 running in enhanced mode
on a 386 while using Stealth and 4dos 4.0?  Windows loads up fine, but
when I try to run a 4dos session, the startup banner starts to appear
and then quits, and Windows gives an "Application violated system
integrity, killing." message.  This seems to happen no matter what I set
the swapping to (I thought it might be the EMS swapping).  I also just
got the upgrade to QEMM 6.02, and the same thing happens.  I can load
command.com fine, and 4dos works if I turn off stealth on the ROM at
F000.  Even turning on Stealth but adding an "X=F000-FFFF" doesn't cure
the problem.

Any ideas?  Thanks in advance.

-Josh Mastronarde
-jm9t+@andrew.cmu.edu

Technical Details

Message-ID: <EduvL_K00WBOM9rGsS@andrew.cmu.edu>

Path:

arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!mips!darwin.sura.net!udel!rochester!cantaloupe.srv.cs.cmu.edu!crabapple.srv.cs.cmu.edu!andrew.cmu.edu!jm9t+

Show Full Headers

Complete Article Headers

Organization: Junior, Electrical and Computer Engineering, Carnegie Mellon, Pittsburgh, PA
Path: arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!mips!darwin.sura.net!udel!rochester!cantaloupe.srv.cs.cmu.edu!crabapple.srv.cs.cmu.edu!andrew.cmu.edu!jm9t+
Newsgroups: comp.sys.ibm.pc.misc
Message-ID: <EduvL_K00WBOM9rGsS@andrew.cmu.edu>
Date: Wed, 15 Apr 1992 00:49:14 -0400 
From: Josh Brian Mastronarde <jm9t+@andrew.cmu.edu>
Subject: Windows 3.0, QEMM Stealth, and 4DOS
Lines: 16